Forum Sveta kompjutera

Nazad   Forum Sveta kompjutera > Test Drive > Ostale komponente

Ostale komponente Kućišta, napajanja, periferije, štampači, skeneri, tastature, miševi, džojstici...

Odgovor
 
Alatke vezane za temu Vrste prikaza
Stara 21.8.2011, 11:45   #1
mica1709
Banned
 
Član od: 2.5.2011.
Lokacija: Bujanovac
Poruke: 156
Zahvalnice: 205
Zahvaljeno jedanput na jednoj poruci
Određen forumom Kvm switch digitus dc-oc-12

Kupio sam pre neki dan ovaj svič pa bih zamolio nekog ko ga već koristi ili zna kako se sa njim rukuje da mi pomogne. Naime nikako nemogu da ukapiram kako se pomoću njega slika na monitoru prebacuje sa jednog na drugi kompjuter. Imam i uputstvo ali nisam baš neki stručnjak za jezike. Kako ga ja tumačim svičovanje bi trebalo da se radi pomoću dvostrukog klika na Ctrl ali ne reaguje. Da napomenem da je uređaj nov.




KVM-SWITCH


Function DC-OC-12U 3. CPU Port Connectors
PC Connectors 2
Port Selection Hot Key
LEDs Selection 2
Keyboard USB

Emulation
Connector-
Console
Port

Mouse USB
Keyboard 1x6 pin mini-DIN Female (PS/2)
Mouse 1x6 pin mini-DIN Female (PS/2)
Monitor 1x HD-15 Female

Installation
Before the installation, make sure the peripherals of all
PCs are grounded properly and turned off.
1. Connect the monitor, keyboard and mouse with the

Connector-
CPU Port

Keyboard
2x USB A-Type
/ Mouse
Monitor 2x HD-15 Male

Console Port Connectors.
2. Plug the CPU Port Connectors into the PCs. 3. Turn on the PCs.

VGA Resolution
Scan Interval
Housing
Weight
Dimensions (LxWxH)

1920x1440 (Max.), DDC2, DDC2B,
DDC2AB, 200MHz
5 sec ~ 30 sec
Plastic
380 g
90x82x26 mm


Operation
1. The function of LED display:

USER MANUAL (V. 2.0)
DC-OC-12U


Package Contents -
 1 Smart View OC-12U KVM Switch
 1 User Manual
Any thing missed, please contact with your vendor.

Cable Length 1.5 meter
Storage Temp -20°c to 85°c
Operating Temp 0°c to 70°c
Humidity 0% to 95%
Hardware Requirements
Requirement specifications
One highest resolution VGA, SVGA or Multisync monitor. Console One PS/2 mouse.
One PS/2 keyboard.
One VGA, SVGA or Multisync card.

LED DISPLAY DESCRIPTION
Light off PC power off
Green light on PC power on and connected
Green light on & Red PC power on, connected and
light flashing selected

Note: It occurs occasionally that the green light of LED
display is on and the red light of LED display keeps
flashing after shutting down the PC because of the
PC default. The condition will not affect the regular
operation of KVM switch.

Features
 Controls two PCs with one PS/2 keyboard, PS/2 mouse
and monitor respectively
 USB 1.0, 1.1 & 2.0 Specification compliant and supports
UHCI, OHCI & EHCI host controller
 Supports the standard PS/2 mouse & Microsoft
IntelliMouse (for Max. 5-button/scroll mouse)
 Supports the Windows 98/98se/Me/2000/XP, Linux  Superior video quality - Up to 1920 x 1440, DDC2,
DDC2B, DDC2AB, 200MHz
 PC selection by Hot Key
 Easy to install--No software required
 Hot Pluggable
 Integral keyboard and mouse emulation for PC booting

PC One USB port.
Appearance
Top View

2. PC selection
Hot Key Navigation allows you to select PC from the keyboard directly.
Options for Hot Key Navigation:
 Select PC by Hot Key
 Command mode
 Auto scan mode
Select PC by Hot Key:
Press either left or right [Ctrl] key twice.
Hot Key Operation Function
[L Ctrl] + [L Ctrl] or

error free
 Auto scan function to monitor PCs
 Auto skips over the power-off PC


-1-

Access between two PCs.
[R Ctrl] + [R Ctrl]
-2-
-3-




Press [Num Lock] key twice, and the 3 keys [Num
Lock], [Caps Lock] and [Scroll Lock] will flash to access the Command Mode.
a). Directly press the function key [F1] ~ [F2] to select
PC.
b). Press the [Left Ctrl] key to disable [Ctrl] hot key
function.
c). Press the [Right Ctrl] key to enable [Ctrl] hot key
function.
d). Press [Left Alt] key to disable Auto skip function. e). Press [Right Alt] key to enable Auto skip function. f). Press [Esc] or [Enter] key to quit the mode.
Note: [Ctrl] Hot Key function - Selecting PC port.
Auto Scan Mode:
Press [Scroll Lock] key twice to activate the Auto Scan Mode. The time scale of Auto Scan ranges from 5 to 30 seconds, and it can be recognized by the lights of the 3 keys [Num Lock], [Caps Lock] and [Scroll Lock] as the timetable below.


a). Press the right number key [+] to increase time
scale.
b). Press the right number key [-] to decrease time
scale.
c). Press [Esc] key to quit the mode.
Note: Light(s) corresponding timetable

Seconds Num Lock Caps Lock Scroll Lock
5 seconds Off Off On
10 seconds On Off Off
15 seconds On Off On
20 seconds Off On Off
25 seconds Off On On
30 seconds On On Off
3. The boot-up default of Smart View KVM Switch is
connected to your first activated PC.
4. When the PC is shut down under the function of
“Auto skips over the power-off PC”, it cannot be
turned on again by keyboard.




-4-


Make sure the cables are qualified and positioned.
Q1 : The keyboard does not respond accurately.
A1a: Re-install the keyboard. Unplug the keyboard
from the Console Port and plug it back again.
A1b: Re-install the KVM Switch. Shut down the PCs,
unplug the cables from the PCs and wait for
five seconds. Then plug the cables back and
activate the PCs.
A1c: When under Auto Scan Mode, please press
[Esc] key to escape.
A1d: Try another keyboard.

Q2 : The mouse does not respond accurately.
A2a: Re-install the mouse. Unplug the mouse from
the Console Port and plug it back again.
A2b: Re-install the KVM Switch. Shut down the PCs,
unplug the cables from the PCs and wait for
five seconds. Then plug the cables back and
activate the PCs.
A2c: Make sure the mouse is set on PS/2 mode.
A2d: Try another mouse.

Q3 : The mouse is out of control.
A3 : The characteristic of the mouse is inefficient.
Try another superior mouse and plug it back
again.

Q4 : There is the video problem.
A4 : The setting of resolution or bandwidth is over
high. Smart View supports the VGA, SVGA,
Multisync and XGA (interlaced) with the
resolution up to 1920 x 1440 Hz. The maximum
bandwidth is 200 MHz.

Q5 : Why the green light of LED display is on and
red light keeps flashing after shutting down
the PC?
A5 : The condition is normal and caused from the
PC default. The condition will not affect the
regular operation of KVM switch.

Q6 : When KVM Switch connect with USB Hub,
but the light has gone out.
A6a: Re-install the USB Hub.
A6b: The USB Hub please use addition external
power not attaching internal power.

Poslednja ispravka: mica1709 (21.8.2011 u 12:04)
mica1709 je offline   Odgovor sa citatom ove poruke
Stara 21.8.2011, 12:01   #2
GoranSTX
Ex Parrot
 
Avatar korisnika GoranSTX
 
Član od: 8.12.2005.
Lokacija: Srednja Zemlja - Loznica
Poruke: 3.915
Zahvalnice: 444
Zahvaljeno 1.932 puta na 1.212 poruka
Slanje poruke preko ICQ-a korisniku GoranSTX
Određen forumom Re: Kvm switch digitus dc-oc-12

Obično bude desni CTRL taster koji treba dva puta brzo pritisnuti. Takođe, neki svičevi zahtevaju da oba konektora za tastaturu budu priključena na odgovarajuće mašine.
GoranSTX je sada online   Odgovor sa citatom ove poruke
Sledeći korisnik se zahvaljuje korisniku GoranSTX na korisnoj poruci:
mica1709 (21.8.2011)
Stara 21.8.2011, 21:12   #3
mica1709
Banned
 
Član od: 2.5.2011.
Lokacija: Bujanovac
Poruke: 156
Zahvalnice: 205
Zahvaljeno jedanput na jednoj poruci
Određen forumom Re: Kvm switch digitus dc-oc-12

Uključeni su konektori na obadva kućišta i za tastaturu i za miša. Ne reaguje na dupli klik ni na levom ni na desnom Ctrl tasteru. Ko dobro zna engleski može da protumači gore postavljeno uputstvo.
mica1709 je offline   Odgovor sa citatom ove poruke
Stara 22.8.2011, 0:42   #4
BMLW
Starosedelac
 
Član od: 21.5.2010.
Lokacija: Svetski putnik
Poruke: 2.232
Zahvalnice: 71
Zahvaljeno 429 puta na 407 poruka
Slanje poruke preko MSN-a korisniku BMLW
Određen forumom Re: Kvm switch digitus dc-oc-12

Pokušaj 3x da stisneš brzo Num Lock pa da na F1 i F2 menjaš kompjutere. Trebalo bi kad 3x stisneš Num Lock da ti sva tri Lock tastera svetle, tj. trepću, u suprotnom mislim da nešto nije ok sa switchom..
BMLW je offline   Odgovor sa citatom ove poruke
Sledeći korisnik se zahvaljuje korisniku BMLW na korisnoj poruci:
mica1709 (22.8.2011)
Odgovor

Bookmarks sajtovi

Alatke vezane za temu
Vrste prikaza

Vaš status
Ne možete postavljati teme
Ne možete odgovarati na poruke
Ne možete slati priloge uz poruke
Ne možete prepravljati svoje poruke

BB kod: uključeno
Smajliji: uključeno
[IMG] kod: uključeno
HTML kod: isključeno


Slične teme
tema temu započeo forum Odgovora Poslednja poruka
tl sf1005d switch problem drale000 Komunikacioni uređaji i umrežavanje 14 28.12.2010 1:45
Router kao switch ? Gumeny Komunikacioni uređaji i umrežavanje 4 18.3.2010 17:23
Switch to kukili Kvarovi 1 25.10.2008 15:41


Sva vremena su po Griniču +2 h. Sada je 19:59.


Powered by vBulletin® verzija 3.8.7
Copyright ©2000–2024, vBulletin Solutions, Inc.
Hosted by Beograd.com