Asus X501 - ne boot-uje sa USB

[summum]

Pozdrav,

Pokušavam već neko vreme da uradim sistem preko USB fleša. Sa tog fleša sam već dva puta radio na dva PC i sada pokušavam na mom lap top-u i neće. Gledao sam na YT kako se namešta boot i prateći korake shvatim da nešto nije u redu:

https://www.youtube.com/watch?v=G8-KSZmvSjM

* Na snimku se vidi da je System boot state DISABLED, a kod mene je ENABLED i ne mogu da promenim.

* Trebalo bi da namestim LAUNCH CSM na ENABLE, ali kad to namestim i odem na SAVE AND EXIT ili samo na SAVE i vratim se na taj prozor, vidim da je već premešteno na staru opciju, tj. LAUNCH CSM DISABLED

* Nema mi opcija USB kada moram da odaberem BOOT, već samo Windows Boot Manager

Molio bih za pomoć. Sistem mi je katastrofa, a supruzi treba lap top za neku praksu koju počinje uskoro.

Hvala svima, pozdrav!

[DanijelGeek]

Prvo probaj da resetujes BIOS. U vecini slucajeva to resi problem.
Koji Windows bi da instaliras?

[DanijelGeek]

PROCITAJ OVO:
What we can do:
1.Disable Safe boot and change Boot Mode to CSM/Legacy BIOS Mode.
2.Make a bootable USB Drive/CD that is acceptable/compatible to UEFI.

1st Option: Disable Safe boot and change Boot Mode to CSM/Legacy BIOS Mode.
1. Load BIOS Settings page ((Head to BIOS Setting on your PC/Laptop which differs from different brands. Usually by striking [F2] key upon loading the unit and before the OS logo appears on the screen. Just search on net how to go to your BIOS settings based on your brand.)
2.Disable Safe boot option from BIOS security settings.
3.Find on your BIOS Settings about Boot Mode, change from UEFI(Unified Extensible Firmware Inferface) boot to CSM(Compability Support Mode)/Legacy BIOS mode boot. Remember that UEFI uses GPT partition type and CSM uses MBR. (Reference on GPT and CSM on link below)
4.a From BIOS Boot Order make the USB as the first priority/first boot.(Remember to revert this option after the installation to prevent future error when booting Unit with attached USB Drive on its port).
or
b. You may skip 4.a and just press the Boot Option Menu Key before OS logo appears during booting. It's usually [F8] or [F10] or [F11] or [F12] on the most brands. Then select USB from Boot menu from options.
5. Save and exit from bios
6. Boot from installer and Install OS.

AKO NISTA OD NAVEDENOG NE USPE PROBAJ DRUGI USB FLASH SKINI WINDOWS 7 USB DVD TOOL INSTALIRAJ GA UBACI ORIGINALAN ISO FAJL WINDOWS-A IMAS NA WINDOWSISO.NET ORIGINALNE ISO FAJLOVE JAVI STA SI URADIO
POZZZ

[summum]

Reseno.

Sve najbolje i hvala puno na odgovorima!

[DanijelGeek]

U cemu je bio problem?